Home › Code lookup › P2783
Powertrain code · Transmission

P2783 Torque Converter Temperature Too High

How urgent? Stop driving as soon as it's safe. This can cause damage or be unsafe.

What it means

The torque converter is overheating. Continuing to drive hard can damage the transmission.

Can I keep driving?

Not right now. Pull over when safe and let the transmission cool. Overheated fluid quickly damages the transmission, so don't tow or drive hard. If the warning returns, you smell burning or it slips, have it towed.

What to test before replacing parts

Check fluid level and condition, check the transmission cooler and lines for blockage, and check converter slip and lockup on a scanner before replacing the converter.

  1. Pull over and let it cool with the engine idling in Park
  2. Check the fluid level and smell for burning
  3. Inspect the transmission cooler and lines

Signs you may notice

  • Transmission or check engine light on
  • Transmission overheat warning
  • Shudder or slipping, or burnt fluid smell

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonHeavy towing or hauling, or long climbs in hot weather
  • CommonLow or burnt transmission fluid
  • CommonSlipping torque converter clutch
  • PossibleClogged or failed transmission cooler

Typical repair once the cause is confirmed

Let it cool, then service the fluid and cooler; a slipping converter may need replacement.

Walk through it step by step: Transmission warning light on →

Common questions

What does P2783 mean?

The torque converter is overheating. Continuing to drive hard can damage the transmission.

Can I drive with code P2783?

Not right now. Pull over when safe and let the transmission cool. Overheated fluid quickly damages the transmission, so don't tow or drive hard. If the warning returns, you smell burning or it slips, have it towed.

What causes P2783?

Common possibilities to test include: heavy towing or hauling, or long climbs in hot weather; low or burnt transmission fluid; slipping torque converter clutch; clogged or failed transmission cooler. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.