P2784 Input/Turbine Speed Sensor "A"/"B" Correlation
What it means
The transmission has two input speed sensors that should agree, and their readings do not match.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare both sensor readings in live data
- Inspect both sensors and their wiring
Signs you may notice
- Check engine or transmission light on
- Harsh or erratic shifts
- Possible limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOne input speed sensor failing
- CommonWiring or connector fault at one sensor
- PossibleDebris on the sensor tip
- PossibleTransmission computer fault
Typical repair once the cause is confirmed
Replace the sensor that reads wrong or repair its wiring.
Common questions
What does P2784 mean?
The transmission has two input speed sensors that should agree, and their readings do not match.
Can I drive with code P2784?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2784?
Common possibilities to test include: one input speed sensor failing; wiring or connector fault at one sensor; debris on the sensor tip; transmission computer fault. A shop should confirm the cause before replacing parts.