Home › Code lookup › P2788
Powertrain code · Transmission

P2788 Auto Shift Manual Adaptive Learning at Limit

How urgent? Get it checked in the next few days

What it means

The automated manual transmission has adjusted itself as far as it can to make up for wear, and cannot adjust any further.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Have the clutch and actuator checked for wear
  2. Reset and relearn the adaptive values with a scan tool

Signs you may notice

  • Check engine or transmission light on
  • Rough or slow gear changes
  • Jerky starts

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn clutch
  • CommonWorn shift mechanism or actuator
  • PossibleAdaptive values not reset after a repair
  • PossibleLow hydraulic fluid

Typical repair once the cause is confirmed

Repair worn parts, then reset and relearn the transmission adaptations.

Walk through it step by step: Harsh or late shifting →

Common questions

What does P2788 mean?

The automated manual transmission has adjusted itself as far as it can to make up for wear, and cannot adjust any further.

Can I drive with code P2788?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2788?

Common possibilities to test include: worn clutch; worn shift mechanism or actuator; adaptive values not reset after a repair; low hydraulic fluid. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.