P2796 Auxiliary Transmission Fluid Pump Control Circuit/Open
What it means
The computer is watching the auxiliary transmission fluid pump control circuit and sees what looks like a broken or disconnected circuit. Cars with engine stop-start or hybrid drive use an electric pump to keep the transmission ready while the engine is off.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Look over the connector and wiring for the auxiliary transmission fluid pump control circuit, checking for damage, corrosion or a loose fit
- Check power, ground and resistance of the part with a meter
- Clear the code and see if it comes back
Signs you may notice
- Check engine light on
- Engine auto stop-start may be disabled
- Delayed or harsh engagement when pulling away
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonUnplugged, loose or corroded connector at the auxiliary transmission fluid pump
- CommonBroken or chafed wire in the auxiliary transmission fluid pump control circuit
- CommonFailed auxiliary transmission fluid pump
- PossibleBlown fuse or failed relay feeding the circuit
- PossibleControl module fault (rare)
Typical repair once the cause is confirmed
Repair the wiring or connector if it is damaged; otherwise replace the auxiliary transmission fluid pump.
Common questions
What does P2796 mean?
The computer is watching the auxiliary transmission fluid pump control circuit and sees what looks like a broken or disconnected circuit. Cars with engine stop-start or hybrid drive use an electric pump to keep the transmission ready while the engine is off.
Can I drive with code P2796?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2796?
Common possibilities to test include: unplugged, loose or corroded connector at the auxiliary transmission fluid pump; broken or chafed wire in the auxiliary transmission fluid pump control circuit; failed auxiliary transmission fluid pump; blown fuse or failed relay feeding the circuit. A shop should confirm the cause before replacing parts.