P279B Transfer Case Gear Low Incorrect Ratio
What it means
The transfer case is in low range, but the speed sensors show a gear ratio that does not match.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the transfer case fluid
- Make sure all four tires are the same size
- Check speed sensor readings in live data
Signs you may notice
- Check engine or 4WD light on
- 4WD may not engage or may slip
- Grinding or clunking from the transfer case possible
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonTransfer case not fully shifted into range
- CommonWorn transfer case chain or gears
- PossibleLow or wrong transfer case fluid
- PossibleFaulty speed sensor or mismatched tire sizes
Typical repair once the cause is confirmed
Repair the shift motor, worn parts or sensor causing the mismatch.
Common questions
What does P279B mean?
The transfer case is in low range, but the speed sensors show a gear ratio that does not match.
Can I drive with code P279B?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P279B?
Common possibilities to test include: transfer case not fully shifted into range; worn transfer case chain or gears; low or wrong transfer case fluid; faulty speed sensor or mismatched tire sizes. A shop should confirm the cause before replacing parts.