Home › Code lookup › U0101
Network code · Network

U0101 Lost Communication With TCM

How urgent? Get it checked in the next few days

What it means

Other computers in the car have stopped hearing from the transmission control module (TCM). It controls the automatic transmission.

Can I keep driving?

Often drivable with care, but the transmission may stay in one gear, giving slow acceleration or high RPM. Avoid highways if it won't shift. If it slips or more warnings pile up, get it checked right away.

What to test before replacing parts

Check the transmission computer's power, ground and fuses, and its network wiring and connectors, before replacing the transmission computer.

  1. Test the battery and charging voltage first
  2. Check the fuses, power and ground for the transmission control module (TCM)
  3. See which modules answer a scan tool to narrow down the break
  4. Inspect network wiring and connectors near the module

Signs you may notice

  • Check engine or transmission light on
  • Transmission may stay in one gear (limp mode)
  • Harsh shifts or no shifts
  • Gear indicator may be blank

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThe transmission control module (TCM) lost power or ground (blown fuse or bad ground)
  • CommonDamaged, corroded or loose network wiring or connector
  • CommonWeak battery or low system voltage
  • PossibleFailed transmission control module (TCM)
  • PossibleAnother module shorting out the network

Typical repair once the cause is confirmed

Restore power, ground or wiring to the transmission control module (TCM); replace the module only after those test good.

Repair costInsufficient verified pricing for this vehicle and repair
Repair transmission module power, ground or wiring. Prepare an itemized shop request.
Walk through it step by step: Transmission warning light on →

Common questions

What does U0101 mean?

Other computers in the car have stopped hearing from the transmission control module (TCM). It controls the automatic transmission.

Can I drive with code U0101?

Often drivable with care, but the transmission may stay in one gear, giving slow acceleration or high RPM. Avoid highways if it won't shift. If it slips or more warnings pile up, get it checked right away.

What causes U0101?

Common possibilities to test include: the transmission control module (tcm) lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed transmission control module (tcm). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.