U0115 Lost Communication With ECM/PCM "B"
What it means
Other computers in the car have stopped hearing from the second engine computer. It runs the engine, so other modules rely on it for engine speed, temperature and other data.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the second engine computer
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Check engine light and several other warning lights on
- Car may not start, or may stall
- Gauges such as the tachometer may stop working
- Transmission may stay in one gear
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonEngine computer lost power or ground (blown fuse, bad relay or corroded ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed second engine computer
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the second engine computer; replace the module only after those test good.
Common questions
What does U0115 mean?
Other computers in the car have stopped hearing from the second engine computer. It runs the engine, so other modules rely on it for engine speed, temperature and other data.
Can I drive with code U0115?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0115?
Common possibilities to test include: engine computer lost power or ground (blown fuse, bad relay or corroded ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed second engine computer. A shop should confirm the cause before replacing parts.