U0121 Lost Communication With Anti-Lock Brake System (ABS) Control Module
What it means
Other computers in the car have stopped hearing from the ABS control module. It is part of the anti-lock brake and stability control system.
Can I keep driving?
Normal braking usually still works, but ABS and stability control may be off, so you can skid more easily. Leave more space and brake gently, especially in rain or snow. If the brake pedal feels different or the red brake light comes on, stop driving and get it checked.
What to test before replacing parts
Check ABS module power, ground and fuses, the network wiring and connector for corrosion, and battery voltage before replacing the ABS module.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the ABS control module
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- ABS, traction control or stability light on
- ABS and stability control may be turned off
- Normal braking usually still works
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWater in the ABS module connector or a corroded module
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed ABS control module
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the ABS control module; replace the module only after those test good.
Common questions
What does U0121 mean?
Other computers in the car have stopped hearing from the ABS control module. It is part of the anti-lock brake and stability control system.
Can I drive with code U0121?
Normal braking usually still works, but ABS and stability control may be off, so you can skid more easily. Leave more space and brake gently, especially in rain or snow. If the brake pedal feels different or the red brake light comes on, stop driving and get it checked.
What causes U0121?
Common possibilities to test include: water in the abs module connector or a corroded module; damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed abs control module. A shop should confirm the cause before replacing parts.