U0130 Lost Communication With Steering Effort Control Module
What it means
Other computers in the car have stopped hearing from the steering effort control module. It is part of the steering system.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the steering effort control module
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Power steering or steering warning light on
- Steering may feel heavy
- Stability control may be turned off
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe steering effort control module lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed steering effort control module
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the steering effort control module; replace the module only after those test good.
Common questions
What does U0130 mean?
Other computers in the car have stopped hearing from the steering effort control module. It is part of the steering system.
Can I drive with code U0130?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0130?
Common possibilities to test include: the steering effort control module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed steering effort control module. A shop should confirm the cause before replacing parts.