Home › Code lookup › U0131
Network code · Network

U0131 Lost Communication With Power Steering Control Module

How urgent? Get it checked in the next few days

What it means

Other computers in the car have stopped hearing from the power steering control module. It is part of the steering system.

Can I keep driving?

Use care. You may lose power steering assist, making steering heavy, especially at low speeds. If steering is heavy, only drive slowly to a nearby shop, or have it towed. If steering feels normal, get it checked soon.

What to test before replacing parts

Check power steering module power, grounds and fuses, network wiring and connector, and battery and charging voltage before replacing the module or steering rack.

  1. Test the battery and charging voltage first
  2. Check the fuses, power and ground for the power steering control module
  3. See which modules answer a scan tool to narrow down the break
  4. Inspect network wiring and connectors near the module

Signs you may notice

  • Power steering or steering warning light on
  • Steering may feel heavy
  • Stability control may be turned off

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThe power steering control module lost power or ground (blown fuse or bad ground)
  • CommonDamaged, corroded or loose network wiring or connector
  • CommonWeak battery or low system voltage
  • PossibleFailed power steering control module
  • PossibleAnother module shorting out the network

Typical repair once the cause is confirmed

Restore power, ground or wiring to the power steering control module; replace the module only after those test good.

Repair costInsufficient verified pricing for this vehicle and repair
Replace power steering control module. Prepare an itemized shop request.
Walk through it step by step: Power steering warning light on →

Common questions

What does U0131 mean?

Other computers in the car have stopped hearing from the power steering control module. It is part of the steering system.

Can I drive with code U0131?

Use care. You may lose power steering assist, making steering heavy, especially at low speeds. If steering is heavy, only drive slowly to a nearby shop, or have it towed. If steering feels normal, get it checked soon.

What causes U0131?

Common possibilities to test include: the power steering control module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed power steering control module. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.