U0133 Lost Communication With Active Roll Control Module
What it means
Other computers in the car have stopped hearing from the active roll control module. It controls part of the suspension or ride system.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the active roll control module
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Suspension or chassis warning light on
- Ride height or firmness may change
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe active roll control module lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed active roll control module
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the active roll control module; replace the module only after those test good.
Common questions
What does U0133 mean?
Other computers in the car have stopped hearing from the active roll control module. It controls part of the suspension or ride system.
Can I drive with code U0133?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0133?
Common possibilities to test include: the active roll control module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed active roll control module. A shop should confirm the cause before replacing parts.