Home › Code lookup › U0146
Network code · Network

U0146 Lost Communication With Serial Data Gateway Module "A"

How urgent? Get it checked in the next few days

What it means

Other computers in the car have stopped hearing from the network gateway module. It passes messages between the different networks in the car.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Test the battery and charging voltage first
  2. Check the fuses, power and ground for the network gateway module
  3. See which modules answer a scan tool to narrow down the break
  4. Inspect network wiring and connectors near the module

Signs you may notice

  • Many warning lights on at once
  • Several modules may not respond to a scan tool

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThe network gateway module lost power or ground (blown fuse or bad ground)
  • CommonDamaged, corroded or loose network wiring or connector
  • CommonWeak battery or low system voltage
  • PossibleFailed network gateway module
  • PossibleAnother module shorting out the network

Typical repair once the cause is confirmed

Restore power, ground or wiring to the network gateway module; replace the module only after those test good.

Walk through it step by step: Many dashboard lights on at once →

Common questions

What does U0146 mean?

Other computers in the car have stopped hearing from the network gateway module. It passes messages between the different networks in the car.

Can I drive with code U0146?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes U0146?

Common possibilities to test include: the network gateway module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed network gateway module. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.