U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module
What it means
Other computers in the car have stopped hearing from the instrument cluster. It is the instrument cluster that shows your gauges and warning lights.
Can I keep driving?
Use care. If the speedometer, fuel gauge or warning lights stop working, you can't see your speed or warnings like overheating or low oil. Avoid driving until it's fixed if the gauges are dead; if they work on and off, get it checked soon.
What to test before replacing parts
Check instrument cluster power, ground and fuses, network wiring at the cluster connector, and battery voltage before replacing the cluster.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the instrument cluster
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Gauges may stop working or drop to zero
- Warning lights may stay on or flicker
- Chimes and messages may stop
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose connector behind the instrument cluster
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed instrument cluster
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the instrument cluster; replace the module only after those test good.
Known on these vehicles
Common questions
What does U0155 mean?
Other computers in the car have stopped hearing from the instrument cluster. It is the instrument cluster that shows your gauges and warning lights.
Can I drive with code U0155?
Use care. If the speedometer, fuel gauge or warning lights stop working, you can't see your speed or warnings like overheating or low oil. Avoid driving until it's fixed if the gauges are dead; if they work on and off, get it checked soon.
What causes U0155?
Common possibilities to test include: loose connector behind the instrument cluster; damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed instrument cluster. A shop should confirm the cause before replacing parts.