U0177 Lost Communication With Restraints System Sensor "H"
What it means
Other computers in the car have stopped hearing from the airbag crash sensor "H". It is part of the airbag and seat belt safety system.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the airbag crash sensor "H"
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Airbag warning light on
- Airbags or seat belt tensioners may not work in a crash
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose connector under a seat or at the airbag module
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed airbag crash sensor "H"
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the airbag crash sensor "H"; replace the module only after those test good.
Common questions
What does U0177 mean?
Other computers in the car have stopped hearing from the airbag crash sensor "H". It is part of the airbag and seat belt safety system.
Can I drive with code U0177?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0177?
Common possibilities to test include: loose connector under a seat or at the airbag module; damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed airbag crash sensor "h". A shop should confirm the cause before replacing parts.