U0188 Lost Communication With Digital Disc Player/Changer Module "B"
What it means
Other computers in the car have stopped hearing from the disc player module "B". It is part of the audio or entertainment system.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the disc player module "B"
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Radio, sound or screen may not work
- Battery may drain if the module stays awake
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe disc player module "B" lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed disc player module "B"
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the disc player module "B"; replace the module only after those test good.
Common questions
What does U0188 mean?
Other computers in the car have stopped hearing from the disc player module "B". It is part of the audio or entertainment system.
Can I drive with code U0188?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0188?
Common possibilities to test include: the disc player module "b" lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed disc player module "b". A shop should confirm the cause before replacing parts.