U0325 Software Incompatibility With Auxiliary Heater Control Module
What it means
The software in the auxiliary heater module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Ask whether any module was recently replaced or reprogrammed
- Check the module part number and software level against the maker data
- Keep a battery maintainer connected during any reprogramming
Signs you may notice
- Heat or A/C may not work or controls may not respond
- Blower may stay on one speed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonModule replaced with a used or wrong part number
- CommonModule not programmed, or programmed with the wrong software
- PossibleSoftware update interrupted, for example by low battery voltage
- PossibleOther modules need updating to match
Typical repair once the cause is confirmed
Program the module with the correct software using dealer-level tools.
Common questions
What does U0325 mean?
The software in the auxiliary heater module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.
Can I drive with code U0325?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0325?
Common possibilities to test include: module replaced with a used or wrong part number; module not programmed, or programmed with the wrong software; software update interrupted, for example by low battery voltage; other modules need updating to match. A shop should confirm the cause before replacing parts.