Home › BMW › 6 / 8 Series › 2016
My vehicle

Your 2016 BMW 6 / 8 Seriesproblems, repair costs and recalls

What we've documented about the 2016 BMW 6 / 8 Series: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 2016115 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Synthetic oil and filter change (BMW LL-spec)Every 5,000–10,000 miles (follow the service indicator) · V8 and V10 engines hold 8–10 quarts, so oil changes cost more than on the 6-cylinder
Price not verified
Ask for an estimate
Front brake pads, rotors and wear sensorAbout every 30,000–50,000 miles · Heavy V8/V10 cars and M Sport brakes wear pads and rotors faster
Price not verified
Ask for an estimate
Rear brake pads, rotors and wear sensorAbout every 40,000–60,000 miles
Price not verified
Ask for an estimate
12-volt AGM battery replacement and registrationAbout every 4–6 years · The battery is in the trunk and must be registered to the car with a scan tool
Price not verified
Ask for an estimate
Spark plug replacement (6, 8 or 10 cylinders)About every 45,000–60,000 miles (sooner on turbo engines) · V8 and V10 plugs take much more labor than the inline-6
Price not verified
Ask for an estimate
Engine coolant drain and refillAbout every 4–6 years; follow the service indicator · Needs a bleed procedure to avoid air pockets
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2016 BMW 6 / 8 Series

11 documented issues apply to 2016, most serious first.

Stop soon2012–2018Engine4.4L twin-turbo V8 (N63)

Twin-turbo V8 burns oil from worn valve stem seals

What you'll notice
Blue smoke at startup or when slowing down, an oil smell, and the oil level dropping quickly.
Why it happens
On the 650i's N63 V8 the turbos sit between the cylinder banks, and that heat wears out valve stem seals early.
What to do
Check oil often. Ask whether BMW's Customer Care Package updates were done. Heavy smoking means the seals need replacing.
Repair costInsufficient verified pricing for this vehicle and repair
Replace valve stem seals (twin-turbo V8). Prepare an itemized shop request.
Walk through this symptom: Oil level keeps dropping →
Stop soon2012–2018Engine4.4L twin-turbo V8 (N63)

Turbochargers fail on the 650i

What you'll notice
Loss of power, a whining or siren noise, smoke, or oil in the intake.
Why it happens
The hot-V layout cooks the turbochargers and their oil lines, so they wear out sooner than on other engines.
What to do
Have boost and oil leaks checked at the first sign. Turbo replacement on this V8 is a big job.
Repair costInsufficient verified pricing for this vehicle and repair
Replace one turbocharger (rebuilt BMW unit). Prepare an itemized shop request.
Stop soon2012–2018Fuel3.0L turbo inline-6 / 4.4L twin-turbo V8

High-pressure fuel pump fails

What you'll notice
Long cranking, rough idle, hesitation, misfires, or the engine dropping into reduced power.
Why it happens
The high-pressure pump that feeds the direct-injection system wears internally.
What to do
Have fuel pressure codes read. A failing pump is replaced; ask the dealer about any extended coverage.
Repair costInsufficient verified pricing for this vehicle and repair
Replace high-pressure fuel pump. Prepare an itemized shop request.
Stop soon2012–2018Cooling3.0L turbo inline-6 (N55)

Thermostat and plastic coolant pipes fail on the 640i

What you'll notice
The temperature gauge swings, coolant goes missing, or an overheating warning appears.
Why it happens
The electric thermostat and plastic coolant pipes on the N55 are weak points.
What to do
Stop if the engine overheats. Above about 80,000 miles many owners replace the cooling parts as a set.
Repair costInsufficient verified pricing for this vehicle and repair
Stop soon2013–2018Engine4.4L twin-turbo V8 (S63)

Rod bearing wear on the M6

What you'll notice
Knocking at idle or under load.
Why it happens
The M6's S63 V8 rod bearings can wear early, especially on cars used on track.
What to do
Have oil analysis and a specialist inspection done. Preventive bearing replacement is common.
Get checked2004–2018Body

Convertible top stops or works slowly

What you'll notice
The soft top moves slowly, stops partway, won't latch, or won't open or close at all.
Why it happens
The top runs on a hydraulic pump and cylinders with small position switches. Pumps wear out, cylinder seals leak, and switches fail.
What to do
Test the top several times before buying. Have a specialist read the top codes before replacing big parts; a switch or leaking cylinder is often the cause.
Repair costInsufficient verified pricing for this vehicle and repair
Repair convertible top hydraulic pump or cylinder. Prepare an itemized shop request.
Get checked2004–2018Suspension

Front control arm bushings wear and the wheel shakes when braking

What you'll notice
Clunks over bumps, a steering wheel shake when braking, loose steering, or uneven tire wear.
Why it happens
The front control arm bushings on these heavy coupes and convertibles crack and wear out with age and mileage.
What to do
Have the front suspension checked. New arms or bushings and an alignment usually fix it.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front control arms (pair) and align. Prepare an itemized shop request.
Walk through this symptom: Car shakes when braking →
Get checked2012–2018Fuel4.4L twin-turbo V8 (N63)

Fuel injectors fail on the 650i V8

What you'll notice
Rough running, misfires, a fuel smell, or a check engine light.
Why it happens
Deposits build on the injector tips, or the injectors fail electrically.
What to do
Get misfire codes diagnosed. Injectors are often replaced in sets.
Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel injectors. Prepare an itemized shop request.
Get checked2012–2018Engine3.0L turbo inline-6 (N55)

Valve cover and oil separator leak on the 640i

What you'll notice
A burning oil smell and oily residue on top of the engine.
Why it happens
Heat cycles break down the valve cover gasket and the built-in crankcase vent system on the N55 engine.
What to do
Have it repaired before oil gets on the exhaust or ignition coils.
Repair costInsufficient verified pricing for this vehicle and repair
Replace valve cover with gasket. Prepare an itemized shop request.
Monitor2004–2018Electrical

iDrive screen freezes, reboots or goes blank

What you'll notice
The center screen freezes, restarts by itself, goes black, or phones won't connect.
Why it happens
Early iDrive units in particular are known for software and hardware faults; later units are better but can still lock up.
What to do
Try a system reset and ask a dealer for the latest software. If the unit has failed, a used or later-version unit is often the fix.
Repair costInsufficient verified pricing for this vehicle and repair
Diagnose and update or replace iDrive head unit. Prepare an itemized shop request.
Monitor2012–2018Body

Trunk seals leak and the carpet gets wet

What you'll notice
Wet carpet or water in the trunk.
Why it happens
The trunk seals are known to fail on this generation.
What to do
Have the seals replaced and dry the trunk out to prevent electrical damage.
Repair costInsufficient verified pricing for this vehicle and repair
Price guide

Repair prices for your 2016 BMW 6 / 8 Series

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Diagnose and update or replace iDrive head unit
  • Repair convertible top hydraulic pump or cylinder
  • Replace front control arms (pair) and align
  • Replace valve stem seals (twin-turbo V8)
  • Replace one turbocharger (rebuilt BMW unit)
  • Replace high-pressure fuel pump
  • Replace fuel injectors
  • Replace valve cover with gasket
  • Replace thermostat
  • Replace trunk seal
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2016 BMW 6 / 8 Series
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2016 BMW 6 / 8 Series as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.