Your 2003 Chrysler Sebringproblems, repair costs and recalls
What we've documented about the 2003 Chrysler Sebring: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2003 Chrysler Sebring
7 documented issues apply to 2003, most serious first.
Oil sludge and engine failure
- What you'll notice
- The oil pressure light flickers at idle or stays on, then knocking or rattling, stalling, or the engine shutting off and not restarting. Many failures happen between about 70,000 and 145,000 miles.
- Why it happens
- The 2.7L V6 is prone to oil breaking down into thick sludge that blocks oil flow, especially if oil changes are stretched out. Starved bearings and the timing chain then fail, sometimes breaking a connecting rod.
- What to do
- Change the oil every 3,000–5,000 miles with the correct oil, and check the level often. If the oil light flickers or you hear knocking, stop driving and have the engine checked. A sludged engine usually needs replacing.
Harsh, delayed or erratic shifting
- What you'll notice
- Hard clunks when downshifting at low speed, a delay before the car moves, getting stuck in a low gear until restarted, or a check engine light with transmission codes.
- Why it happens
- The automatic transmission in these Sebrings is known for shift problems from worn internal parts, solenoids and pressure sensors, or the transmission computer.
- What to do
- Have the codes read and the fluid checked; use only the Chrysler-specified fluid. Sometimes a sensor, solenoid or computer update fixes it, but some cars need a rebuild.
Sun visor can come loose when the airbag fires (recall)
- What you'll notice
- No warning sign before a crash.
- Why it happens
- The passenger sun visor can break free when the passenger airbag deploys and hit the occupant. Recalls 15V-338 and 16V-401 add a tether.
- What to do
- Have a dealer check both recalls by VIN.
Free at a Chrysler, Dodge, Jeep or Ram dealer if it was never done. Check your VIN.
Fuel return line can leak (recall)
- What you'll notice
- A fuel smell, fuel drips, or fuel wetness near the tank or lines.
- Why it happens
- A restricted fitting in the fuel return line can raise fuel pressure and make a hose leak (recall 03V-443). Some 2004 two-door cars also have a poorly molded return hose fitting that can break (recall 04V-313).
- What to do
- Do not drive with a fuel smell. Have a dealer check both recalls by VIN.
Free at a Chrysler, Dodge, Jeep or Ram dealer if it was never done. Check your VIN.
Rear spring seat cracks and clunks
- What you'll notice
- Clunking or squeaking from the rear over bumps, and in bad cases a loose rear strut.
- Why it happens
- The aluminum spring seat castings in the rear suspension can crack or corrode.
- What to do
- Have the rear struts and spring seats inspected. Replace cracked parts on both sides before the strut comes loose.
Heater blows cold
- What you'll notice
- Little or no heat from the vents, sometimes with the check engine light on.
- Why it happens
- A stuck-open thermostat keeps the engine from warming up and sets a code; low coolant or a clogged heater core also cuts heat.
- What to do
- Check the coolant level first, then have the thermostat and heater core checked.
Blower fan works only on high
- What you'll notice
- The heater and A/C fan only blows on the highest setting, or some speeds stop working.
- Why it happens
- The blower motor resistor, which sets the lower fan speeds, burns out.
- What to do
- Replace the blower motor resistor; it is a small, inexpensive part. If it keeps failing, have the blower motor checked too.
Repair prices for your 2003 Chrysler Sebring
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine with a used or remanufactured unit
- Replace transmission solenoid/sensor, or rebuild transmission
- Replace rear strut/spring assemblies and mounts
- Replace blower motor resistor
- Replace thermostat or flush heater core
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…