Your 2006 Chrysler Sebringproblems, repair costs and recalls
What we've documented about the 2006 Chrysler Sebring: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Chrysler Sebring
3 documented issues apply to 2006, most serious first.
Oil sludge and engine failure
- What you'll notice
- The oil pressure light flickers at idle or stays on, then knocking or rattling, stalling, or the engine shutting off and not restarting. Many failures happen between about 70,000 and 145,000 miles.
- Why it happens
- The 2.7L V6 is prone to oil breaking down into thick sludge that blocks oil flow, especially if oil changes are stretched out. Starved bearings and the timing chain then fail, sometimes breaking a connecting rod.
- What to do
- Change the oil every 3,000–5,000 miles with the correct oil, and check the level often. If the oil light flickers or you hear knocking, stop driving and have the engine checked. A sludged engine usually needs replacing.
Harsh, delayed or erratic shifting
- What you'll notice
- Hard clunks when downshifting at low speed, a delay before the car moves, getting stuck in a low gear until restarted, or a check engine light with transmission codes.
- Why it happens
- The automatic transmission in these Sebrings is known for shift problems from worn internal parts, solenoids and pressure sensors, or the transmission computer.
- What to do
- Have the codes read and the fluid checked; use only the Chrysler-specified fluid. Sometimes a sensor, solenoid or computer update fixes it, but some cars need a rebuild.
Horn goes off by itself
- What you'll notice
- The horn sounds on its own, sometimes for a long time while the car is parked and locked, often late at night.
- Why it happens
- The horn switch in the steering wheel pad or the clock spring behind it fails and shorts.
- What to do
- Pull the horn fuse or relay as a stopgap. The usual fix is replacing the steering wheel horn switch; a technician should handle it because it sits with the airbag.
Repair prices for your 2006 Chrysler Sebring
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine with a used or remanufactured unit
- Replace transmission solenoid/sensor, or rebuild transmission
- Replace steering wheel horn switch or clock spring
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…