Home › Dodge › Viper › 1996
My vehicle

Your 1996 Dodge Viperproblems, repair costs and recalls

What we've documented about the 1996 Dodge Viper: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 1996104 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter change (large-capacity V10)Per owner's manual, often every 3,000–6,000 miles
Price not verified
Ask for an estimate
Front brake padsDepends heavily on driving; track use wears them much faster · RepairPal shows 2016-2017 pads costing about twice as much as older years.
Price not verified
Ask for an estimate
Rear brake padsDepends heavily on driving
Price not verified
Ask for an estimate
12V battery replacementAbout every 3–5 years; use a maintainer during storage
Price not verified
Ask for an estimate
Spark plugs (set of 10)Per owner's manual, often around 100,000 miles
Price not verified
Ask for an estimate
Engine coolant drain and refillAbout every 5 years
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1996 Dodge Viper

10 documented issues apply to 1996, most serious first.

Stop soon1996–2002Engine8.0L V10

Crankshaft damper bolt works loose

What you'll notice
A new vibration, a wobbling crank pulley at the front of the engine, or a drive belt that suddenly comes off.
Why it happens
The bolt holding the crankshaft damper (harmonic balancer) on the 8.0L V10 can loosen. Left alone, it can damage the crankshaft nose.
What to do
Stop driving if the pulley wobbles or the belt comes off. A shop can re-torque the bolt with thread locker; pinning kits are available to stop it from coming back.
Stop soon1996–2002Engine8.0L V10

Head gasket leaks on original gaskets

What you'll notice
Coolant or oil weeping down the sides of the block, overheating, or oil and coolant mixing.
Why it happens
The original composite head gaskets on these engines break down with age. Later replacement gaskets are multi-layer steel.
What to do
Look for staining on the block below the heads. If you see coolant loss or overheating, have a cooling system pressure test and combustion leak test done.
Repair costInsufficient verified pricing for this vehicle and repair
Replace head gaskets (multi-layer steel). Prepare an itemized shop request.
Stop soon1996–1999Steering

Steering rack mounting brackets can crack (recall)

What you'll notice
Steering feels loose, delayed or clunky, especially on cars driven hard or on track.
Why it happens
Hard driving and track use could crack the brackets that mount the steering rack to the frame. Eventually the rack could break free. Chrysler added reinforcement gussets.
What to do
Ask a dealer to check whether recall 01V313000 was done on your car. It's free.
Typical repair costNo charge if your vehicle is in the recall
Install steering rack reinforcement kit (recall 01V313000)
Free at a Dodge/Chrysler dealer if the recall was never done.
Stop soon1996–1999Suspension

Rear differential mounting bracket welds can crack (recall)

What you'll notice
Clunks from the rear under hard acceleration, or unstable handling.
Why it happens
On cars used for track or aggressive driving, the welds on the rear differential mounting bracket could crack and the bracket could come loose. Dealers reinforce the frame.
What to do
Have a dealer confirm recall 01V312000 was completed, especially if the car has been tracked.
Typical repair costNo charge if your vehicle is in the recall
Inspect and reinforce differential bracket (recall 01V312000)
Free at a Dodge/Chrysler dealer if the recall was never done.
Get checked1996–2017Drivetrain

Clutch slipping or wearing out

What you'll notice
Engine revs climb without the car speeding up, especially under hard acceleration, a burning smell after hard driving, or the engagement point moving around in the pedal travel.
Why it happens
The V10's huge torque is hard on the clutch, and hard launches and track use wear the friction disc and pressure plate. Used buyers are told to assume a clutch may be due unless records prove otherwise.
What to do
If it slips or smells burnt, ease off and have it inspected before the flywheel is damaged. Ask for clutch records when buying.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch kit (OEM). Prepare an itemized shop request.
Walk through this symptom: Clutch slipping →
Get checked1996–2002Drivetrain

Clutch slave cylinder seal failure

What you'll notice
The clutch pedal feels spongy or sinks, gears grind or are hard to select, or there is fluid near the bellhousing.
Why it happens
The clutch slave cylinder design on 1992-2002 Vipers is prone to seal leaks, letting fluid out and air in, so the clutch doesn't fully release.
What to do
Check the clutch fluid reservoir. A leaking slave cylinder is usually replaced along with the clutch since the transmission must come out.
Repair costInsufficient verified pricing for this vehicle and repair
Replace slave cylinder with clutch kit. Prepare an itemized shop request.
Get checked1996–2002Steering

Power steering pump bracket cracks and assist is lost

What you'll notice
Steering suddenly becomes heavy, often with a squeal or a belt that has come off.
Why it happens
The cast bracket that holds the power steering pump can crack, and the factory pulley can also fail, letting the belt come off.
What to do
Pull over safely and check the belt. Replace a cracked bracket; stronger billet brackets and pulleys are sold as upgrades.
Repair costInsufficient verified pricing for this vehicle and repair
Replace power steering pump and bracket. Prepare an itemized shop request.
Monitor1996–2002Engine8.0L V10

Erratic or hunting idle

What you'll notice
The idle speed surges up and down or the engine nearly stalls at a stop.
Why it happens
A partly clogged idle control valve is the usual cause on these cars.
What to do
Have the idle control valve and throttle body cleaned or checked. It is usually a simple repair.
Walk through this symptom: Engine idles high →
Monitor1996–2002Engine

Oil and fluid leaks from aging gaskets and hoses

What you'll notice
Oil spots under the car, a burning oil smell, or damp gaskets around the engine.
Why it happens
Early Vipers are known for gasket leaks, and the hoses, belts and seals on these older cars are now aging out.
What to do
Have the leaks traced and replace hardened hoses and belts by age, not just mileage.
Monitor1996–2017Drivetrain

Clunk or click from the rear driveline

What you'll notice
A clunk when getting on and off the throttle, or a single click or pop from the rear as the clutch is released.
Why it happens
RepairPal lists these as the most commonly reported Viper complaints. Some driveline clunk is considered normal on this car.
What to do
If the noise is new or getting louder, have the U-joints, differential and mounts checked.
Repair costInsufficient verified pricing for this vehicle and repair
Replace worn U-joint. Prepare an itemized shop request.
Price guide

Repair prices for your 1996 Dodge Viper

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace clutch kit (OEM)
  • Replace slave cylinder with clutch kit
  • Replace head gaskets (multi-layer steel)
  • Replace power steering pump and bracket
  • Replace worn U-joint

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Install steering rack reinforcement kit (recall 01V313000)No charge if your vehicle is included
  • Inspect and reinforce differential bracket (recall 01V312000)No charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1996 Dodge Viper
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1996 Dodge Viper as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.