Home › Dodge › Viper › 2013
My vehicle

Your 2013 Dodge Viperproblems, repair costs and recalls

What we've documented about the 2013 Dodge Viper: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 2013101 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter change (large-capacity V10)Per owner's manual, often every 3,000–6,000 miles
Price not verified
Ask for an estimate
Front brake padsDepends heavily on driving; track use wears them much faster · RepairPal shows 2016-2017 pads costing about twice as much as older years.
Price not verified
Ask for an estimate
Rear brake padsDepends heavily on driving
Price not verified
Ask for an estimate
12V battery replacementAbout every 3–5 years; use a maintainer during storage
Price not verified
Ask for an estimate
Spark plugs (set of 10)Per owner's manual, often around 100,000 miles
Price not verified
Ask for an estimate
Engine coolant drain and refillAbout every 5 years
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2013 Dodge Viper

10 documented issues apply to 2013, most serious first.

Stop soon2013–2015Engine8.4L V10

Early engine failure

What you'll notice
Knocking from the engine, low oil pressure, or the engine failing, sometimes at low miles.
Why it happens
Some earlier cars of this generation lost engines, often under warranty, possibly from rod bearing failure or debris left from manufacturing. It is considered rare.
What to do
Ask whether the engine has been replaced and check the warranty history. Shut the engine off right away if it knocks or the oil light comes on.
Get checked1996–2017Drivetrain

Clutch slipping or wearing out

What you'll notice
Engine revs climb without the car speeding up, especially under hard acceleration, a burning smell after hard driving, or the engagement point moving around in the pedal travel.
Why it happens
The V10's huge torque is hard on the clutch, and hard launches and track use wear the friction disc and pressure plate. Used buyers are told to assume a clutch may be due unless records prove otherwise.
What to do
If it slips or smells burnt, ease off and have it inspected before the flywheel is damaged. Ask for clutch records when buying.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch kit (OEM). Prepare an itemized shop request.
Walk through this symptom: Clutch slipping →
Get checked2013–2017Drivetrain

Soft clutch pedal from leaking slave cylinder

What you'll notice
The clutch pedal feels soft or is slow to come back up, and you may see a few drops of clear fluid under the transmission.
Why it happens
The slave cylinder inside the transmission bellhousing can leak. If ignored, the clutch can stop working entirely.
What to do
Get it looked at early, while the car still drives. Have a Viper-experienced shop or dealer confirm the leak source.
Repair costInsufficient verified pricing for this vehicle and repair
Replace slave cylinder with clutch kit. Prepare an itemized shop request.
Get checked2013–2015Engine8.4L V10

High oil consumption

What you'll notice
The oil level drops between changes and you need to add oil often.
Why it happens
Some 2013-2015 cars used too much oil, and Chrysler worked with owners to find and fix affected engines. The dipstick is also hard to read accurately.
What to do
Check the oil on level ground after the car has sat, reading the stick right away. Report heavy oil use to a dealer.
Walk through this symptom: Oil level keeps dropping →
Get checked2013–2017Cooling

Water pump failure

What you'll notice
Coolant leaks from the front of the engine, a sweet smell, or the temperature gauge climbing.
Why it happens
The water pump on the last-generation Viper is reported to be prone to failure.
What to do
Watch for coolant drips and check the level often. Replace a leaking pump before the engine overheats.
Repair costInsufficient verified pricing for this vehicle and repair
Get checked2013–2014Safety

Seat position sensor can make airbags deploy too softly (recall)

What you'll notice
No symptoms. The airbags may inflate with less force than intended in a crash.
Why it happens
The seat position sensors could misread where the seat is. Dealers add a metal shim to fix the reading.
What to do
Have a dealer check recall 14V529000.
Typical repair costNo charge if your vehicle is in the recall
Install seat position sensor shim (recall 14V529000)
Free at a Dodge/Chrysler dealer if the recall was never done.
Get checked2013–2015Electrical

Radio software could be hacked remotely (recall)

What you'll notice
No symptoms.
Why it happens
Security gaps in the Uconnect radio software could let outsiders reach some vehicle systems. Chrysler sent out a software update.
What to do
Make sure the radio software update from recall 15V461000 was installed.
Typical repair costNo charge if your vehicle is in the recall
Radio software update (recall 15V461000)
Free at a Dodge/Chrysler dealer if the recall was never done.
Monitor1996–2017Drivetrain

Clunk or click from the rear driveline

What you'll notice
A clunk when getting on and off the throttle, or a single click or pop from the rear as the clutch is released.
Why it happens
RepairPal lists these as the most commonly reported Viper complaints. Some driveline clunk is considered normal on this car.
What to do
If the noise is new or getting louder, have the U-joints, differential and mounts checked.
Repair costInsufficient verified pricing for this vehicle and repair
Replace worn U-joint. Prepare an itemized shop request.
Monitor2003–2017Body

Door hinges sag

What you'll notice
The door rides low, rubs or catches on closing, pops, or the weather seal is damaged and leaks water.
Why it happens
The door hinges on these cars can sag or deform over time.
What to do
Lift the open door gently to check for play. Have worn hinges adjusted or replaced before seals and paint are damaged.
Monitor2013–2017Body

Windows bind or hit the body

What you'll notice
A window is noisy or binds, or the glass touches the body when the door closes.
Why it happens
Window operation and door fit are known weak points carried over from earlier Vipers.
What to do
Run both windows fully up and down and close the doors slowly to check. Have the glass and door adjusted.
Price guide

Repair prices for your 2013 Dodge Viper

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace clutch kit (OEM)
  • Replace slave cylinder with clutch kit
  • Replace worn U-joint
  • Replace water pump

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Install seat position sensor shim (recall 14V529000)No charge if your vehicle is included
  • Radio software update (recall 15V461000)No charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2013 Dodge Viper
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2013 Dodge Viper as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.