Your 1998 GMC Yukonproblems, repair costs and recalls
What we've documented about the 1998 GMC Yukon: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1998 GMC Yukon
5 documented issues apply to 1998, most serious first.
Four-speed automatic slipping
- What you'll notice
- Engine revs climb without acceleration, a gear goes missing, or reverse fails.
- Why it happens
- The 4L60-E's 3-4 clutch pack is a known weak spot, especially in heavy SUVs that tow.
- What to do
- Get a fluid check and road test soon. Stop towing until it is diagnosed.
Front brake rotor can crack (recall)
- What you'll notice
- Grinding or knocking from a front wheel, a pedal that pulses, or a wheel that feels loose.
- Why it happens
- A batch of front rotors was built out of specification and can crack in service; in the worst case the wheel can come away.
- What to do
- Stop driving it and have the front brakes inspected now. The recall repair is free, so check the VIN first.
Steering shaft pinch bolt can loosen and fall out (recall)
- What you'll notice
- Vague or sloppy steering, a clunk when you turn, or in the worst case no steering response at all.
- Why it happens
- The bolt that clamps the steering shaft coupling was not always tightened properly and can work its way out.
- What to do
- Do not drive it until the coupling has been checked. Run the VIN for the free recall repair.
Fuel injector "spider" assembly problems
- What you'll notice
- Slow starts, rough idle, misfires, or a fuel smell.
- Why it happens
- The central injector unit's nozzles can gum up or leak as the truck ages.
- What to do
- Have a shop test it. Treat any fuel smell as urgent.
Intake manifold gaskets leak coolant on the 5.7L V8
- What you'll notice
- Coolant level keeps dropping with no puddle, crusty residue on top of the engine, a sweet smell through the vents, or oil that looks like coffee with milk.
- Why it happens
- The intake gaskets used on this Vortec V8 soften and let coolant escape, sometimes outward and sometimes down into the oil.
- What to do
- Have the cooling system pressure-tested soon. If the oil looks milky, stop driving it until the gaskets are replaced, or the bearings will suffer.
Repair prices for your 1998 GMC Yukon
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace spider fuel injector assembly and intake gaskets
- Replace with remanufactured 4L60-E transmission
- Replace front brake rotors in pairs
- Inspect and replace steering shaft pinch bolt
- Replace intake manifold gaskets
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…