Your 2019 GMC Yukonproblems, repair costs and recalls
What we've documented about the 2019 GMC Yukon: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2019 GMC Yukon
4 documented issues apply to 2019, most serious first.
Lifter failure on V8s with cylinder deactivation
- What you'll notice
- Tapping noise, misfire codes, shaking at idle, or power loss.
- Why it happens
- The deactivating lifters can stick or collapse, sometimes ruining the camshaft.
- What to do
- Diagnose quickly to limit engine damage.
Wheel speed sensor fault can brake one wheel by itself (recall)
- What you'll notice
- The truck pulls hard to one side under braking or tugs at the wheel on its own, usually with ABS or stability warnings.
- Why it happens
- If a wheel speed sensor fails, the stability system can misread it and apply the brake at one wheel without the driver asking.
- What to do
- Have the recall software update done as soon as you can and get any ABS warning diagnosed; this can cause a loss of control.
Missing transfer case part can lock the wheels (do-not-drive recall)
- What you'll notice
- Sudden grinding or binding from under the truck, or the wheels locking up with no warning.
- Why it happens
- A component can be missing inside the transfer case, which lets it jam and lock the front or rear wheels.
- What to do
- Do not drive it. Check the VIN and have it towed to the dealer for the free repair.
Magnetic Ride Control shocks leak or knock
- What you'll notice
- On trucks with the Magnetic Ride Control suspension (standard on Denali), you may see oily fluid on a shock body, hear knocking over bumps, or notice a bouncier ride or a suspension service message.
- Why it happens
- The electronically controlled shocks can develop seal leaks or internal noise as they age. GM has a service bulletin telling dealers how to judge a leak and to replace only the shock that has failed.
- What to do
- Have the shocks looked at during your next service. A light film is normal, but fluid running down the shock or a clear change in ride means that shock should be replaced.
Repair prices for your 2019 GMC Yukon
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace lifters, camshaft and lifter guides
- Replace one Magnetic Ride Control shock
- Replace wheel speed sensor and reprogram brake module
- Inspect transfer case and install missing component
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…