Your 2021 GMC Yukonproblems, repair costs and recalls
What we've documented about the 2021 GMC Yukon: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2021 GMC Yukon
5 documented issues apply to 2021, most serious first.
Lifter failure on V8s with cylinder deactivation
- What you'll notice
- Tapping noise, misfire codes, shaking at idle, or power loss.
- Why it happens
- The deactivating lifters can stick or collapse, sometimes ruining the camshaft.
- What to do
- Diagnose quickly to limit engine damage.
6.2L engine recall for rod and crank defects
- What you'll notice
- Engine knock, low oil pressure, rough running, or a sudden stall.
- Why it happens
- Some engines had defective crankshaft or connecting rod parts that can fail.
- What to do
- Check for open recalls. Stop driving if you hear knocking.
Ten-speed transmission valve can lock the rear wheels (recall)
- What you'll notice
- A sudden harsh downshift or a brief lockup of the rear wheels while driving, sometimes after a warning message about the transmission. Some owners first notice a rough shift into a lower gear.
- Why it happens
- A control valve inside the ten-speed automatic can wear and lose pressure, which can cause an abrupt downshift that momentarily locks the rear wheels. The 2021 recall covers trucks with the 3.0L diesel, and a later recall covers 2022 trucks. Dealers load software that watches for the fault and limits the transmission before it can lock up.
- What to do
- Check your VIN for open recalls and get the free software update done promptly. If you feel a harsh downshift or the rear wheels grab, slow down, pull over safely and have the truck towed to a dealer.
Third-row seat belt buckle rivet may be formed wrong (recall)
- What you'll notice
- Nothing obvious; the buckle latches and releases normally.
- Why it happens
- A rivet in the third-row buckle may not have been formed correctly, so the buckle may not hold in a crash.
- What to do
- Have the buckle inspected under the recall at no cost and seat passengers elsewhere until then.
Daytime running lights can stay on with the headlights (recall)
- What you'll notice
- The daytime running lights do not dim or switch off when you put the headlights on, and other drivers flash you.
- Why it happens
- The lighting software does not turn the running lights off as the federal standard requires.
- What to do
- Ask for the free software update at your next service visit.
Repair prices for your 2021 GMC Yukon
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace lifters, camshaft and lifter guides
- Replace engine under recall
- Update transmission control software
- Reprogram body control module lighting software
- Replace third-row seat belt buckle assembly
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…