Jeep Gladiatorproblems, repair costs and recalls
Problems reported across 2020–2026. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
24 documented issues across all years, most serious first.
Death wobble front-end shake
- What you'll notice
- After a bump at highway speed, the steering wheel and front end shake violently and keep shaking until you slow way down.
- Why it happens
- Like the Wrangler, the Gladiator uses a solid front axle that depends on tight steering and suspension joints. Loose track bar bolts or worn track bar, tie rod, drag link or ball joint parts can start a runaway shake. A worn steering damper can hide the problem but does not cause it.
- What to do
- Slow down steadily without jerking the wheel. Have the track bar bolts torqued and the track bar, tie rods, drag link and ball joints inspected and replaced as needed, then balance and align the tires.
Misfire and ticking from worn rocker arms or camshaft
- What you'll notice
- A check engine light (sometimes flashing) with misfire codes, rough running, loss of power on hills, and a ticking noise that gets worse over time.
- Why it happens
- On the 3.6L V6, a rocker arm roller can fail and wear a groove into a camshaft lobe, and lifters can go soft. Misfires from these and from worn plugs or coils are the second most common 2020 Gladiator complaint.
- What to do
- Have the misfire diagnosed beyond plugs and coils, including a check of the rockers and cam lobes. If the valvetrain is worn, the rockers and camshaft are normally replaced together. Ask about powertrain warranty coverage.
Manual clutch can overheat and break (recalls)
- What you'll notice
- A clutch temperature warning, a burning smell or smoke after slow off-road or stop-and-go driving, a soft pedal, or slipping and hard shifting.
- Why it happens
- The clutch pressure plate can overheat and crack, which can throw debris, start a fire or leave you without drive. Early recalls rerouted wiring and added software; recall 23V-116 replaces the clutch assembly.
- What to do
- Check your VIN for recalls 20V-124, 21V-028 and 23V-116. If you see the warning or smell burning, stop and let the clutch cool, and avoid long clutch slipping until it is repaired.
Engine software may stall manual trucks (recall)
- What you'll notice
- The engine stalls and you lose drive power.
- Why it happens
- Engine computer software on some 2021 manual-transmission trucks could stall the engine, including trucks already updated under the clutch recall.
- What to do
- Check your VIN for recall 24V-572. The dealer updates the software free.
EcoDiesel high-pressure fuel pump failure (recalls)
- What you'll notice
- Sudden loss of power or a stall while driving, long cranking or no-start, and fuel pressure warning codes.
- Why it happens
- The high-pressure fuel pump can wear internally and fail, sending metal debris through the fuel system and stalling the engine.
- What to do
- Check your VIN for recalls 22V-767 and 23V-263. If the engine stalls or loses power, get off the road and have the truck towed rather than restarting it repeatedly.
Instrument cluster can go blank (recall)
- What you'll notice
- The gauge cluster goes dark or flickers, gauges stop working, all warning lights come on at once, or turn signal indicators stop showing.
- Why it happens
- The instrument cluster can short internally and fail.
- What to do
- Check your VIN for recall 24V-652. The dealer replaces the cluster free. Drive carefully until then, since warnings may not show.
Power steering pump wiring fire risk (recall)
- What you'll notice
- A burning or electrical smell from the front of the engine bay, a power steering warning, or steering assist that comes and goes.
- Why it happens
- The wiring to the electric-hydraulic power steering pump can overheat at its connection and start a fire, even with the truck parked and off.
- What to do
- Check your VIN for recall 26V-363. Park outside and away from buildings until the dealer replaces the wiring and pump as needed.
Rear driveshaft joint built without grease (recall)
- What you'll notice
- A vibration at 45-70 mph that gets worse over time. In the worst case the driveshaft breaks.
- Why it happens
- The joint at one end of the rear driveshaft on some early trucks was assembled without grease, so it can overheat, seize or fracture.
- What to do
- Check your VIN for recall 19V-636. The dealer replaces the driveshaft free. If it breaks, set the parking brake before leaving the truck.
Front seat belt may not hold in a crash (recall)
- What you'll notice
- No symptoms.
- Why it happens
- A front seat belt retractor might not control the occupant's forward movement after it locks in a crash.
- What to do
- Check your VIN for recall 20V-580. The dealer replaces the retractors free.
Automatic may not hold in Park (recall)
- What you'll notice
- The truck can roll after you shift into Park.
- Why it happens
- The parking pawl inside the automatic transmission might not engage properly.
- What to do
- Always set the parking brake and check your VIN for recall 22V-639. The dealer replaces the transmission free.
Seat belt pretensioner may not fire (recall)
- What you'll notice
- Usually no warning; an airbag light may come on.
- Why it happens
- The gas generator in the front seat belt retractors may have been welded improperly, so the pretensioner may not work in a crash.
- What to do
- Check your VIN for recall 22V-766. The dealer replaces the retractors free.
Driver airbag may not deploy from steering column module (recall)
- What you'll notice
- An airbag warning light may come on, or there may be no warning.
- Why it happens
- The steering column control module, which connects the driver airbag, may have been welded improperly.
- What to do
- Check your VIN for recall 24V-199. The dealer inspects and replaces the module free.
Steel wheels can crack (recall)
- What you'll notice
- A vibration, a tire that will not hold air, or visible cracks in a steel wheel.
- Why it happens
- Some steel wheels were made with walls that are too thin and can crack or come off.
- What to do
- Check your VIN for recall 26V-456 right away and do not drive on a cracked wheel.
Wandering, loose steering at highway speeds (TSB)
- What you'll notice
- The truck drifts left or right and needs constant small corrections to stay in its lane, with play or a dead spot at center. Wind and trailers make it worse.
- Why it happens
- Wandering is the top 2020 Gladiator complaint, often in the first few thousand miles. Jeep's bulletin 08-074-20 covers replacing the steering gear and updating the electric-hydraulic power steering software.
- What to do
- Have the alignment checked and ask the dealer about bulletin 08-074-20. If the steering still feels loose afterward, go back, since some owners needed further work.
Check engine light from torque converter clutch code (TSB)
- What you'll notice
- The check engine light comes on with code P1DB7. The automatic may run hot, and you may see a transmission temperature warning on long climbs or while towing.
- Why it happens
- On 2022 and 2023 automatic V6 trucks, the transmission computer's software can mismanage the torque converter clutch, the part that locks the engine to the transmission at cruising speed. Jeep bulletins 21-023-25 (2022) and 21-019-25 (2023) cover a software fix.
- What to do
- Have the code read. If it is P1DB7, ask the dealer for the transmission computer update in the bulletin for your year. If the transmission temperature warning comes on, ease off and let it cool, and do not keep towing until it is checked.
No backup camera or reverse lights on manual trucks (recall)
- What you'll notice
- The backup camera picture does not appear and the reverse lights stay off when you shift into reverse.
- Why it happens
- A faulty gear position sensor on the manual transmission may not report that reverse is selected.
- What to do
- Check your VIN for recall 23V-641. The dealer replaces the sensor free.
Backup camera image stays on after reverse (recall)
- What you'll notice
- The rear camera picture stays on the screen after you shift out of reverse.
- Why it happens
- A radio software error kept the image on longer than federal rules allow.
- What to do
- Check your VIN for recall 20V-191. The update is free at a dealer or over the air.
Backup camera image may not appear (recall)
- What you'll notice
- The screen stays blank or does not show the rear camera picture when you shift into reverse.
- Why it happens
- A radio software error could stop the rearview image from displaying.
- What to do
- Check your VIN for recall 22V-638. The dealer updates the radio software free.
Backup camera image may fail in reverse (2026 recall)
- What you'll notice
- The rear camera picture does not show when you shift into reverse.
- Why it happens
- A radio software problem can keep the rearview image from displaying.
- What to do
- Check your VIN for recall 26V-531. The fix is a free dealer or over-the-air software update.
Rubicon sway bar disconnect stops working
- What you'll notice
- The sway bar disconnect light flashes and the front sway bar will not disconnect or reconnect.
- Why it happens
- Water and mud can corrode the electric actuator and its connector, and the bar can bind when it is under load. Owners filed a class action over failures.
- What to do
- Park on level ground and try again so the bar is not loaded. If it still fails, have the actuator and connector checked.
Check engine light from oxygen sensor heater codes (TSB)
- What you'll notice
- The check engine light comes on, usually with no change in how the truck drives. A scan shows oxygen sensor heater codes such as P0032, P0038, P0052 or P0058.
- Why it happens
- Engine computer software on some 2024 V6 trucks can wrongly flag the oxygen sensor heaters. Jeep bulletin 18-065-24 updates the software; if the codes return, a sensor may truly need replacing.
- What to do
- Have the codes read and ask the dealer about bulletin 18-065-24. If the light comes back after the update, have the sensor and its wiring tested before replacing parts.
Tire pressure warning light on with tires properly filled (TSB)
- What you'll notice
- The tire pressure warning light stays on or flashes even though all four tires are at the right pressure.
- Why it happens
- Jeep issued bulletin S2408000002 in January 2024 for 2024 Gladiators with a steady or flashing tire pressure light, pointing to a known fault in the tire pressure monitoring system rather than the tires.
- What to do
- First check every tire, including the spare, with a gauge, since a real low tire is a safety risk. If pressures are correct and the light stays on, ask the dealer about bulletin S2408000002.
Uconnect screen glitches and "Uconnect Box Error" (TSBs)
- What you'll notice
- The 12.3-inch touchscreen acts up: ghost touches, a black navigation map, missing widgets, Apple CarPlay or Android Auto dropping out, or a message that the Uconnect Box needs service.
- Why it happens
- These are software faults in the Uconnect 5 radio and the telematics module on refreshed trucks. Jeep released several updates, including bulletins 08-033-25 (USB update for 2024), 08-131-25 (over-the-air radio update for 2024-2025) and 08-269-25 (telematics update for 2025).
- What to do
- Accept any over-the-air update the screen offers, with the truck in Park and the engine off. If problems remain, ask the dealer to check your software level against these bulletins.
Rear window defroster stops working (TSB)
- What you'll notice
- The rear window does not clear when you press the rear defrost button, or only part of it clears.
- Why it happens
- Jeep bulletin S2523000024 for the 2025 Gladiator covers the solder connections on the rear glass defroster grid coming loose from the glass.
- What to do
- Look at the two connection points on the edges of the rear glass for a loose tab. If the truck is under warranty, have the dealer repair it under this bulletin rather than gluing it yourself.
Repair prices for your Jeep Gladiator
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace front track bar and re-torque steering joints
- Replace steering gear, update power steering software and align
- Replace rocker arms and camshaft
- Reprogram transmission control module
- Reprogram engine control module
- Replace front disconnecting sway bar assembly
- Update radio and telematics software
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace clutch assembly and update softwareNo charge if your vehicle is included
- Update engine computer softwareNo charge if your vehicle is included
- Replace gear position sensorNo charge if your vehicle is included
- Replace high-pressure fuel pump and contaminated fuel partsNo charge if your vehicle is included
- Replace instrument clusterNo charge if your vehicle is included
- Replace power steering pump wiring and pump as neededNo charge if your vehicle is included
- Replace rear driveshaftNo charge if your vehicle is included
- Replace front seat belt retractorsNo charge if your vehicle is included
- Update radio softwareNo charge if your vehicle is included
- Replace automatic transmissionNo charge if your vehicle is included
- Inspect and replace steering column control moduleNo charge if your vehicle is included
- Inspect and replace steel wheels and valve stemsNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.