Your 2024 Jeep Gladiatorproblems, repair costs and recalls
What we've documented about the 2024 Jeep Gladiator: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2024 Jeep Gladiator
8 documented issues apply to 2024, most serious first.
Death wobble front-end shake
- What you'll notice
- After a bump at highway speed, the steering wheel and front end shake violently and keep shaking until you slow way down.
- Why it happens
- Like the Wrangler, the Gladiator uses a solid front axle that depends on tight steering and suspension joints. Loose track bar bolts or worn track bar, tie rod, drag link or ball joint parts can start a runaway shake. A worn steering damper can hide the problem but does not cause it.
- What to do
- Slow down steadily without jerking the wheel. Have the track bar bolts torqued and the track bar, tie rods, drag link and ball joints inspected and replaced as needed, then balance and align the tires.
Misfire and ticking from worn rocker arms or camshaft
- What you'll notice
- A check engine light (sometimes flashing) with misfire codes, rough running, loss of power on hills, and a ticking noise that gets worse over time.
- Why it happens
- On the 3.6L V6, a rocker arm roller can fail and wear a groove into a camshaft lobe, and lifters can go soft. Misfires from these and from worn plugs or coils are the second most common 2020 Gladiator complaint.
- What to do
- Have the misfire diagnosed beyond plugs and coils, including a check of the rockers and cam lobes. If the valvetrain is worn, the rockers and camshaft are normally replaced together. Ask about powertrain warranty coverage.
Instrument cluster can go blank (recall)
- What you'll notice
- The gauge cluster goes dark or flickers, gauges stop working, all warning lights come on at once, or turn signal indicators stop showing.
- Why it happens
- The instrument cluster can short internally and fail.
- What to do
- Check your VIN for recall 24V-652. The dealer replaces the cluster free. Drive carefully until then, since warnings may not show.
Power steering pump wiring fire risk (recall)
- What you'll notice
- A burning or electrical smell from the front of the engine bay, a power steering warning, or steering assist that comes and goes.
- Why it happens
- The wiring to the electric-hydraulic power steering pump can overheat at its connection and start a fire, even with the truck parked and off.
- What to do
- Check your VIN for recall 26V-363. Park outside and away from buildings until the dealer replaces the wiring and pump as needed.
Rubicon sway bar disconnect stops working
- What you'll notice
- The sway bar disconnect light flashes and the front sway bar will not disconnect or reconnect.
- Why it happens
- Water and mud can corrode the electric actuator and its connector, and the bar can bind when it is under load. Owners filed a class action over failures.
- What to do
- Park on level ground and try again so the bar is not loaded. If it still fails, have the actuator and connector checked.
Check engine light from oxygen sensor heater codes (TSB)
- What you'll notice
- The check engine light comes on, usually with no change in how the truck drives. A scan shows oxygen sensor heater codes such as P0032, P0038, P0052 or P0058.
- Why it happens
- Engine computer software on some 2024 V6 trucks can wrongly flag the oxygen sensor heaters. Jeep bulletin 18-065-24 updates the software; if the codes return, a sensor may truly need replacing.
- What to do
- Have the codes read and ask the dealer about bulletin 18-065-24. If the light comes back after the update, have the sensor and its wiring tested before replacing parts.
Tire pressure warning light on with tires properly filled (TSB)
- What you'll notice
- The tire pressure warning light stays on or flashes even though all four tires are at the right pressure.
- Why it happens
- Jeep issued bulletin S2408000002 in January 2024 for 2024 Gladiators with a steady or flashing tire pressure light, pointing to a known fault in the tire pressure monitoring system rather than the tires.
- What to do
- First check every tire, including the spare, with a gauge, since a real low tire is a safety risk. If pressures are correct and the light stays on, ask the dealer about bulletin S2408000002.
Uconnect screen glitches and "Uconnect Box Error" (TSBs)
- What you'll notice
- The 12.3-inch touchscreen acts up: ghost touches, a black navigation map, missing widgets, Apple CarPlay or Android Auto dropping out, or a message that the Uconnect Box needs service.
- Why it happens
- These are software faults in the Uconnect 5 radio and the telematics module on refreshed trucks. Jeep released several updates, including bulletins 08-033-25 (USB update for 2024), 08-131-25 (over-the-air radio update for 2024-2025) and 08-269-25 (telematics update for 2025).
- What to do
- Accept any over-the-air update the screen offers, with the truck in Park and the engine off. If problems remain, ask the dealer to check your software level against these bulletins.
Repair prices for your 2024 Jeep Gladiator
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace front track bar and re-torque steering joints
- Replace rocker arms and camshaft
- Reprogram engine control module
- Replace front disconnecting sway bar assembly
- Update radio and telematics software
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace instrument clusterNo charge if your vehicle is included
- Replace power steering pump wiring and pump as neededNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…