Your 2023 Jeep Gladiatorproblems, repair costs and recalls
What we've documented about the 2023 Jeep Gladiator: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2023 Jeep Gladiator
10 documented issues apply to 2023, most serious first.
Death wobble front-end shake
- What you'll notice
- After a bump at highway speed, the steering wheel and front end shake violently and keep shaking until you slow way down.
- Why it happens
- Like the Wrangler, the Gladiator uses a solid front axle that depends on tight steering and suspension joints. Loose track bar bolts or worn track bar, tie rod, drag link or ball joint parts can start a runaway shake. A worn steering damper can hide the problem but does not cause it.
- What to do
- Slow down steadily without jerking the wheel. Have the track bar bolts torqued and the track bar, tie rods, drag link and ball joints inspected and replaced as needed, then balance and align the tires.
Misfire and ticking from worn rocker arms or camshaft
- What you'll notice
- A check engine light (sometimes flashing) with misfire codes, rough running, loss of power on hills, and a ticking noise that gets worse over time.
- Why it happens
- On the 3.6L V6, a rocker arm roller can fail and wear a groove into a camshaft lobe, and lifters can go soft. Misfires from these and from worn plugs or coils are the second most common 2020 Gladiator complaint.
- What to do
- Have the misfire diagnosed beyond plugs and coils, including a check of the rockers and cam lobes. If the valvetrain is worn, the rockers and camshaft are normally replaced together. Ask about powertrain warranty coverage.
Manual clutch can overheat and break (recalls)
- What you'll notice
- A clutch temperature warning, a burning smell or smoke after slow off-road or stop-and-go driving, a soft pedal, or slipping and hard shifting.
- Why it happens
- The clutch pressure plate can overheat and crack, which can throw debris, start a fire or leave you without drive. Early recalls rerouted wiring and added software; recall 23V-116 replaces the clutch assembly.
- What to do
- Check your VIN for recalls 20V-124, 21V-028 and 23V-116. If you see the warning or smell burning, stop and let the clutch cool, and avoid long clutch slipping until it is repaired.
EcoDiesel high-pressure fuel pump failure (recalls)
- What you'll notice
- Sudden loss of power or a stall while driving, long cranking or no-start, and fuel pressure warning codes.
- Why it happens
- The high-pressure fuel pump can wear internally and fail, sending metal debris through the fuel system and stalling the engine.
- What to do
- Check your VIN for recalls 22V-767 and 23V-263. If the engine stalls or loses power, get off the road and have the truck towed rather than restarting it repeatedly.
Instrument cluster can go blank (recall)
- What you'll notice
- The gauge cluster goes dark or flickers, gauges stop working, all warning lights come on at once, or turn signal indicators stop showing.
- Why it happens
- The instrument cluster can short internally and fail.
- What to do
- Check your VIN for recall 24V-652. The dealer replaces the cluster free. Drive carefully until then, since warnings may not show.
Power steering pump wiring fire risk (recall)
- What you'll notice
- A burning or electrical smell from the front of the engine bay, a power steering warning, or steering assist that comes and goes.
- Why it happens
- The wiring to the electric-hydraulic power steering pump can overheat at its connection and start a fire, even with the truck parked and off.
- What to do
- Check your VIN for recall 26V-363. Park outside and away from buildings until the dealer replaces the wiring and pump as needed.
Driver airbag may not deploy from steering column module (recall)
- What you'll notice
- An airbag warning light may come on, or there may be no warning.
- Why it happens
- The steering column control module, which connects the driver airbag, may have been welded improperly.
- What to do
- Check your VIN for recall 24V-199. The dealer inspects and replaces the module free.
Check engine light from torque converter clutch code (TSB)
- What you'll notice
- The check engine light comes on with code P1DB7. The automatic may run hot, and you may see a transmission temperature warning on long climbs or while towing.
- Why it happens
- On 2022 and 2023 automatic V6 trucks, the transmission computer's software can mismanage the torque converter clutch, the part that locks the engine to the transmission at cruising speed. Jeep bulletins 21-023-25 (2022) and 21-019-25 (2023) cover a software fix.
- What to do
- Have the code read. If it is P1DB7, ask the dealer for the transmission computer update in the bulletin for your year. If the transmission temperature warning comes on, ease off and let it cool, and do not keep towing until it is checked.
No backup camera or reverse lights on manual trucks (recall)
- What you'll notice
- The backup camera picture does not appear and the reverse lights stay off when you shift into reverse.
- Why it happens
- A faulty gear position sensor on the manual transmission may not report that reverse is selected.
- What to do
- Check your VIN for recall 23V-641. The dealer replaces the sensor free.
Rubicon sway bar disconnect stops working
- What you'll notice
- The sway bar disconnect light flashes and the front sway bar will not disconnect or reconnect.
- Why it happens
- Water and mud can corrode the electric actuator and its connector, and the bar can bind when it is under load. Owners filed a class action over failures.
- What to do
- Park on level ground and try again so the bar is not loaded. If it still fails, have the actuator and connector checked.
Repair prices for your 2023 Jeep Gladiator
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace front track bar and re-torque steering joints
- Replace rocker arms and camshaft
- Reprogram transmission control module
- Replace front disconnecting sway bar assembly
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace clutch assembly and update softwareNo charge if your vehicle is included
- Replace gear position sensorNo charge if your vehicle is included
- Replace high-pressure fuel pump and contaminated fuel partsNo charge if your vehicle is included
- Replace instrument clusterNo charge if your vehicle is included
- Replace power steering pump wiring and pump as neededNo charge if your vehicle is included
- Inspect and replace steering column control moduleNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…