Your 1998 Nissan Frontierproblems, repair costs and recalls
What we've documented about the 1998 Nissan Frontier: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1998 Nissan Frontier
3 documented issues apply to 1998, most serious first.
Distributor shaft seizing (stalls or will not start)
- What you'll notice
- The engine cuts out in traffic, runs rough, or cranks but will not start. It may restart after cooling down, then quit again.
- Why it happens
- First-generation trucks use a distributor, and its shaft bearing can rust and bind. As it drags, ignition timing and spark become erratic until the engine dies.
- What to do
- Do not rely on the truck until it is fixed, since it can stall in traffic. Have the ignition system checked and replace the distributor if the shaft is binding.
Shifter can come out of Park with the key removed (recall)
- What you'll notice
- The lever can be moved out of Park without the key in the ignition, and the truck can roll away.
- Why it happens
- A pin that secures the shift mechanism can work loose, so the interlock that should hold the lever in Park no longer does.
- What to do
- Always set the parking brake and have the interlock repaired. The truck can roll while parked.
Front seat belt webbing can be cut by the recliner handle (recall)
- What you'll notice
- Frayed or cut webbing on a front seat belt, or a belt that will not retract smoothly.
- Why it happens
- On bucket seats the belt can slip past the seat back recliner handle, where the edge can cut into the webbing.
- What to do
- Have the belts inspected and replaced. A cut belt can break in a crash.
Repair prices for your 1998 Nissan Frontier
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace distributor assembly
- Replace shift interlock pin and lock plate
- Replace front seat belt assembly
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…