Your 2000 Nissan Frontierproblems, repair costs and recalls
What we've documented about the 2000 Nissan Frontier: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2000 Nissan Frontier
5 documented issues apply to 2000, most serious first.
Distributor shaft seizing (stalls or will not start)
- What you'll notice
- The engine cuts out in traffic, runs rough, or cranks but will not start. It may restart after cooling down, then quit again.
- Why it happens
- First-generation trucks use a distributor, and its shaft bearing can rust and bind. As it drags, ignition timing and spark become erratic until the engine dies.
- What to do
- Do not rely on the truck until it is fixed, since it can stall in traffic. Have the ignition system checked and replace the distributor if the shaft is binding.
Fuel pump wiring terminal can crack and corrode (recall)
- What you'll notice
- Long cranking, a stall at low speed or while idling, or the engine will not start at all.
- Why it happens
- The electrical terminal on the in-tank fuel pump can crack and corrode, which cuts power to the pump.
- What to do
- Have it checked before it strands you or stalls you in traffic; the pump assembly is replaced.
Shift cable lock plate can break (recall)
- What you'll notice
- The gear shown on the indicator does not match the gear the truck is actually in, or it will not stay in Park.
- Why it happens
- A plastic lock plate on the shift cable can break, which lets the cable and the lever get out of step.
- What to do
- Have it repaired right away. The truck can move in a gear you did not select or roll out of Park.
Tail lamp bulb can fall out of its socket (recall)
- What you'll notice
- A brake light or tail light that flickers or stops working, sometimes coming back when the bulb is pushed in.
- Why it happens
- The socket may not hold the bulb firmly, so the contact is lost with vibration.
- What to do
- Have the socket or lamp assembly replaced so drivers behind can see your brake lights.
Cracked exhaust manifold (3.3L)
- What you'll notice
- A ticking or puffing sound from the engine bay, louder when cold, sometimes with an exhaust smell or a check engine light.
- Why it happens
- The manifold, most often on the right side, can crack or lose its studs after years of heating and cooling. Nissan published a service bulletin for this ticking noise.
- What to do
- Have the manifold inspected. It is not an emergency, but fix it before exhaust fumes start reaching the cab or the leak grows.
Repair prices for your 2000 Nissan Frontier
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace distributor assembly
- Replace cracked exhaust manifold and gaskets
- Replace tail lamp bulb socket or lamp assembly
- Replace in-tank fuel pump assembly
- Replace shift cable lock plate
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…