P0404 Exhaust Gas Recirculation Control Circuit Range/Performance
What it means
The EGR valve is not moving to the position the computer asks for, usually because carbon is making it stick or the valve is wearing out.
Can I keep driving?
Usually you can keep driving and book a repair. If the engine stalls at stops or idles very rough, the valve may be sticking open; limit driving, since stalling in traffic is risky. If you hear pinging under load, avoid hard acceleration.
What to test before replacing parts
Compare actual and commanded EGR position on a scan tool, check for carbon sticking the valve and the vacuum supply, and inspect the connector before replacing the valve.
- Command the EGR open and closed with a scan tool and watch actual position
- Remove and inspect the valve for carbon
- Check the connector and wiring for damage
Signs you may notice
- Check engine light on
- Rough idle or stalling if the valve sticks open
- Pinging under acceleration if it sticks closed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonCarbon buildup making the EGR valve stick
- CommonWorn or failing EGR valve
- CommonFaulty EGR position sensor in the valve
- PossibleWiring or connector problem at the valve
- PossibleVacuum supply problem on vacuum-operated valves
Typical repair once the cause is confirmed
Usually cleaning or replacing the EGR valve.
Known on these vehicles
Common questions
What does P0404 mean?
The EGR valve is not moving to the position the computer asks for, usually because carbon is making it stick or the valve is wearing out.
Can I drive with code P0404?
Usually you can keep driving and book a repair. If the engine stalls at stops or idles very rough, the valve may be sticking open; limit driving, since stalling in traffic is risky. If you hear pinging under load, avoid hard acceleration.
What causes P0404?
Common possibilities to test include: carbon buildup making the egr valve stick; worn or failing egr valve; faulty egr position sensor in the valve; wiring or connector problem at the valve. A shop should confirm the cause before replacing parts.