Home › Code lookup › P0408
Powertrain code · Emissions

P0408 Exhaust Gas Recirculation Sensor "B" Circuit High

How urgent? Book a check when convenient

What it means

The second EGR sensor is reading higher than possible, which usually means an open wire or a bad sensor.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor ground and signal at the connector
  2. Look for broken or corroded wiring

Signs you may notice

  • Check engine light on
  • Usually no change in driving

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EGR sensor "B"
  • CommonOpen ground or signal wire
  • PossibleSignal wire shorted to voltage

Typical repair once the cause is confirmed

Replace the faulty sensor or repair the wiring.

Common questions

What does P0408 mean?

The second EGR sensor is reading higher than possible, which usually means an open wire or a bad sensor.

Can I drive with code P0408?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0408?

Common possibilities to test include: failed egr sensor "b"; open ground or signal wire; signal wire shorted to voltage. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.