P2213 NOx Sensor Circuit Bank 2
What it means
The engine computer has found a problem in the circuit for the NOx sensor (bank 2), which measures nitrogen oxide pollution in diesel exhaust so the exhaust treatment system can adjust. It usually points to wiring, a connector or the sensor itself.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the NOx sensor connector and wiring for damage or corrosion
- Check the sensor power, ground and signal with a meter
Signs you may notice
- Check engine light on
- Possible emissions warning or reduced power on some diesels
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty NOx sensor
- CommonDamaged, corroded or unplugged connector
- PossibleBroken or chafed wiring
- PossibleEngine computer problem (rare)
Typical repair once the cause is confirmed
Repair any damaged wiring or connector first; if the circuit tests good, replace the NOx sensor.
Common questions
What does P2213 mean?
The engine computer has found a problem in the circuit for the NOx sensor (bank 2), which measures nitrogen oxide pollution in diesel exhaust so the exhaust treatment system can adjust. It usually points to wiring, a connector or the sensor itself.
Can I drive with code P2213?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2213?
Common possibilities to test include: faulty nox sensor; damaged, corroded or unplugged connector; broken or chafed wiring; engine computer problem (rare). A shop should confirm the cause before replacing parts.