Home › Code lookup › P2214
Powertrain code · Emissions

P2214 NOx Sensor Circuit Range/Performance Bank 2

How urgent? Get it checked in the next few days

What it means

The NOx sensor (bank 2) is giving readings that don't make sense compared with what the computer expects. This sensor measures nitrogen oxide pollution in diesel exhaust so the exhaust treatment system can adjust. The sensor may be failing or the system it watches may have a real problem.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the NOx sensor reading with related sensors in live data
  2. Check wiring and connector for corrosion or looseness

Signs you may notice

  • Check engine light on
  • Possible emissions warning or reduced power on some diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing or out-of-calibration NOx sensor
  • CommonA real fault in the system the sensor monitors
  • PossibleHigh resistance in the wiring or connector

Typical repair once the cause is confirmed

Confirm the system itself is working, then replace the NOx sensor if its readings are off.

Repair costInsufficient verified pricing for this vehicle and repair

Common questions

What does P2214 mean?

The NOx sensor (bank 2) is giving readings that don't make sense compared with what the computer expects. This sensor measures nitrogen oxide pollution in diesel exhaust so the exhaust treatment system can adjust. The sensor may be failing or the system it watches may have a real problem.

Can I drive with code P2214?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2214?

Common possibilities to test include: failing or out-of-calibration nox sensor; a real fault in the system the sensor monitors; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.