P2227 Barometric Pressure Circuit Range/Performance
What it means
The barometric pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor measures outside air pressure so the computer can adjust for altitude. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the barometric sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- Possible hesitation or poor running
- Possible reduced power on turbo engines
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration barometric pressure sensor (on some cars built into the MAP sensor or computer)
- CommonBlocked sensor port or vacuum hose
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the barometric pressure sensor (on some cars built into the MAP sensor or computer) if its readings are off.
Common questions
What does P2227 mean?
The barometric pressure sensor is giving readings that don't make sense compared with what the computer expects. This sensor measures outside air pressure so the computer can adjust for altitude. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2227?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2227?
Common possibilities to test include: failing or out-of-calibration barometric pressure sensor (on some cars built into the map sensor or computer); blocked sensor port or vacuum hose; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.