P2244 O2 Sensor Reference Voltage Performance Bank 1 Sensor 1
What it means
The front air-fuel ratio sensor reference voltage circuit (bank 1 sensor 1) is giving readings that don't make sense compared with what the computer expects. This sensor helps the computer run the wide-range front oxygen sensor. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the front O2 sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- Poor fuel economy
- Possible rough running or hesitation
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration front air-fuel ratio (wide-band O2) sensor
- CommonA real fault in the system the sensor monitors
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the front air-fuel ratio (wide-band O2) sensor if its readings are off.
Common questions
What does P2244 mean?
The front air-fuel ratio sensor reference voltage circuit (bank 1 sensor 1) is giving readings that don't make sense compared with what the computer expects. This sensor helps the computer run the wide-range front oxygen sensor. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2244?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2244?
Common possibilities to test include: failing or out-of-calibration front air-fuel ratio (wide-band o2) sensor; a real fault in the system the sensor monitors; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.