Home › Code lookup › P2263
Powertrain code · Fuel and air

P2263 Turbocharger/Supercharger Boost System Performance

How urgent? Get it checked in the next few days

What it means

The turbo or supercharger isn't making the boost pressure the computer expects. Leaks, a sticking wastegate or turbo wear are typical reasons.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Smoke- or pressure-test the intake for boost leaks
  2. Check wastegate or vane movement
  3. Compare actual and desired boost in live data

Signs you may notice

  • Check engine light on
  • Loss of power, especially when accelerating
  • Possible reduced power mode
  • Possible whistling or hissing sound

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonBoost leak from a cracked hose or loose clamp
  • CommonSticking wastegate or turbo vanes
  • CommonFaulty boost control solenoid
  • PossibleWorn turbocharger
  • PossibleFaulty boost pressure sensor
  • PossibleClogged air filter or exhaust restriction

Typical repair once the cause is confirmed

Fix leaks and sticking wastegate or vane controls first; replace the turbo only if it is worn out.

Repair costInsufficient verified pricing for this vehicle and repair
Repair boost leak or replace boost control solenoid. Prepare an itemized shop request.
Walk through it step by step: Car has no power when accelerating →

Common questions

What does P2263 mean?

The turbo or supercharger isn't making the boost pressure the computer expects. Leaks, a sticking wastegate or turbo wear are typical reasons.

Can I drive with code P2263?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2263?

Common possibilities to test include: boost leak from a cracked hose or loose clamp; sticking wastegate or turbo vanes; faulty boost control solenoid; worn turbocharger. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.