Home › Code lookup › P2268
Powertrain code · Fuel and air

P2268 Water in Fuel Sensor Circuit Intermittent

How urgent? Book a check when convenient

What it means

The signal from the water-in-fuel sensor keeps dropping out or jumping around. This sensor warns you when water collects in the diesel fuel filter. A loose connection or a damaged wire is the usual reason.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Wiggle the harness and connector while watching live data for dropouts
  2. Inspect the water-in-fuel sensor wiring along its whole route

Signs you may notice

  • Check engine light on
  • Water-in-fuel warning may stay on or not work

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonChafed wire that opens or shorts as the engine moves
  • PossibleFailing water-in-fuel sensor

Typical repair once the cause is confirmed

Repair any damaged wiring or connector first; if the circuit tests good, replace the water-in-fuel sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace water-in-fuel sensor. Prepare an itemized shop request.

Common questions

What does P2268 mean?

The signal from the water-in-fuel sensor keeps dropping out or jumping around. This sensor warns you when water collects in the diesel fuel filter. A loose connection or a damaged wire is the usual reason.

Can I drive with code P2268?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2268?

Common possibilities to test include: loose or corroded connector; chafed wire that opens or shorts as the engine moves; failing water-in-fuel sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.