Home › Code lookup › P2273
Powertrain code · Emissions

P2273 O2 Sensor Signal Biased/Stuck Rich Bank 2 Sensor 2

How urgent? Book a check when convenient

What it means

The oxygen sensor after the catalytic converter (bank 2, sensor 2) keeps reading rich and doesn't respond the way it should. The sensor may be worn or there may be a rich-running problem.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for exhaust leaks around the sensor
  2. Watch the sensor reading respond when the engine is briefly forced rich

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions inspection

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn or contaminated downstream oxygen sensor
  • CommonEngine running rich (leaking injector or high fuel pressure)
  • PossibleSensor wiring problem
  • PossibleWorn catalytic converter

Typical repair once the cause is confirmed

Fix any exhaust leak or fuel problem; if the sensor still doesn't respond, replace it.

Repair costInsufficient verified pricing for this vehicle and repair
Replace downstream oxygen sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P2273 mean?

The oxygen sensor after the catalytic converter (bank 2, sensor 2) keeps reading rich and doesn't respond the way it should. The sensor may be worn or there may be a rich-running problem.

Can I drive with code P2273?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2273?

Common possibilities to test include: worn or contaminated downstream oxygen sensor; engine running rich (leaking injector or high fuel pressure); sensor wiring problem; worn catalytic converter. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.