P2276 O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 3
What it means
The oxygen sensor after the catalytic converter (bank 2, sensor 3) keeps reading lean and doesn't respond the way it should. The sensor may be worn or there may be a leak in the exhaust.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for exhaust leaks around the sensor
- Watch the sensor reading respond when the engine is briefly forced rich
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
- May fail an emissions inspection
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn or failed downstream oxygen sensor
- CommonExhaust leak near the sensor
- CommonEngine running lean (vacuum leak or low fuel pressure)
- PossibleSensor wiring problem
Typical repair once the cause is confirmed
Fix any exhaust leak or fuel problem; if the sensor still doesn't respond, replace it.
Common questions
What does P2276 mean?
The oxygen sensor after the catalytic converter (bank 2, sensor 3) keeps reading lean and doesn't respond the way it should. The sensor may be worn or there may be a leak in the exhaust.
Can I drive with code P2276?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2276?
Common possibilities to test include: worn or failed downstream oxygen sensor; exhaust leak near the sensor; engine running lean (vacuum leak or low fuel pressure); sensor wiring problem. A shop should confirm the cause before replacing parts.