P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
What it means
The computer thinks the bank 1 and bank 2 sensor 3 oxygen sensors are plugged into each other's connectors. This usually happens after sensor replacement.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check that each sensor's connector goes to the correct bank
- Review any recent exhaust or sensor work
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOxygen sensor connectors plugged into the wrong side
- CommonWiring repaired or crossed incorrectly
- PossibleWrong sensor installed
Typical repair once the cause is confirmed
Swap the connectors to the correct sides and clear the code.
Common questions
What does P2278 mean?
The computer thinks the bank 1 and bank 2 sensor 3 oxygen sensors are plugged into each other's connectors. This usually happens after sensor replacement.
Can I drive with code P2278?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2278?
Common possibilities to test include: oxygen sensor connectors plugged into the wrong side; wiring repaired or crossed incorrectly; wrong sensor installed. A shop should confirm the cause before replacing parts.