Home › Code lookup › P2279
Powertrain code · Fuel and air

P2279 Intake Air System Leak

How urgent? Book a check when convenient

What it means

The computer has found that air is getting into the engine without being measured, which usually means a vacuum or intake leak. This makes the engine run lean.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Listen for hissing at idle and inspect vacuum hoses
  2. Smoke-test the intake system for leaks
  3. Check that intake duct clamps are tight

Signs you may notice

  • Check engine light on
  • Rough or high idle
  • Hissing sound from the engine bay
  • Possible stalling or hesitation

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCracked or disconnected vacuum hose
  • CommonLeaking intake manifold gasket
  • CommonLoose or cracked air intake duct after the MAF sensor
  • PossibleFaulty PCV valve or hose
  • PossibleLeaking throttle body gasket
  • PossibleBrake booster vacuum leak

Typical repair once the cause is confirmed

Find and repair the leaking hose, gasket or duct.

Repair costInsufficient verified pricing for this vehicle and repair
Find and repair intake air leak. Prepare an itemized shop request.
Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P2279 mean?

The computer has found that air is getting into the engine without being measured, which usually means a vacuum or intake leak. This makes the engine run lean.

Can I drive with code P2279?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2279?

Common possibilities to test include: cracked or disconnected vacuum hose; leaking intake manifold gasket; loose or cracked air intake duct after the maf sensor; faulty pcv valve or hose. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.