P2281 Air Leak Between MAF and Throttle Body
What it means
Air is leaking into the intake between the airflow (MAF) sensor and the throttle body, so it isn't being measured. The engine may run lean or rough.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the air filter, housing and ducts
- Smoke-test the intake for leaks
Signs you may notice
- Check engine light on
- Rough idle or hesitation
- Possible hissing sound
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonCracked or loose intake duct or clamp
- PossibleDirty or faulty MAF sensor
- PossibleCracked PCV hose
Typical repair once the cause is confirmed
Replace a clogged filter or repair the leak found.
Common questions
What does P2281 mean?
Air is leaking into the intake between the airflow (MAF) sensor and the throttle body, so it isn't being measured. The engine may run lean or rough.
Can I drive with code P2281?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2281?
Common possibilities to test include: cracked or loose intake duct or clamp; dirty or faulty maf sensor; cracked pcv hose. A shop should confirm the cause before replacing parts.