P2284 Injector Control Pressure Sensor Circuit Range/Performance
What it means
The injection control pressure (ICP) sensor is giving readings that don't make sense compared with what the computer expects. This sensor reads the high oil pressure used to fire the fuel injectors on some diesels. The sensor may be failing or the system it watches may have a real problem.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the ICP sensor reading with related sensors in live data
- Check wiring and connector for corrosion or looseness
Signs you may notice
- Check engine light on
- Hard starting or no start
- Rough running or low power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or out-of-calibration injection control pressure sensor
- CommonA real fault in the system the sensor monitors
- PossibleHigh resistance in the wiring or connector
Typical repair once the cause is confirmed
Confirm the system itself is working, then replace the injection control pressure sensor if its readings are off.
Where it shows up
- Used on oil-fired injection diesels such as the Ford Power Stroke 7.3L and 6.0L
Known on these vehicles
Common questions
What does P2284 mean?
The injection control pressure (ICP) sensor is giving readings that don't make sense compared with what the computer expects. This sensor reads the high oil pressure used to fire the fuel injectors on some diesels. The sensor may be failing or the system it watches may have a real problem.
Can I drive with code P2284?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2284?
Common possibilities to test include: failing or out-of-calibration injection control pressure sensor; a real fault in the system the sensor monitors; high resistance in the wiring or connector. A shop should confirm the cause before replacing parts.