P2290 Injector Control Pressure Too Low
What it means
The oil pressure used to fire the diesel fuel injectors is lower than it should be.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check engine oil level and condition
- Compare commanded and actual injection pressure in live data
Signs you may notice
- Check engine light on
- Low power, hard starting or stalling
- Possible reduced power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLeaking high-pressure oil system (seals or fittings)
- CommonFaulty injection pressure regulator valve
- PossibleLow or wrong-grade engine oil
- PossibleWiring or connector problem
Typical repair once the cause is confirmed
Repair the oil leak, regulator or sensor problem that testing points to.
Where it shows up
- Seen on oil-fired injection diesels such as the Ford Power Stroke 7.3L and 6.0L
Known on these vehicles
Common questions
What does P2290 mean?
The oil pressure used to fire the diesel fuel injectors is lower than it should be.
Can I drive with code P2290?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2290?
Common possibilities to test include: leaking high-pressure oil system (seals or fittings); faulty injection pressure regulator valve; low or wrong-grade engine oil; wiring or connector problem. A shop should confirm the cause before replacing parts.