P2292 Injector Control Pressure Erratic
What it means
The injection oil pressure is jumping around instead of holding steady.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check engine oil level and condition
- Compare commanded and actual injection pressure in live data
Signs you may notice
- Check engine light on
- Rough running or surging
- Possible reduced power
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty injection pressure regulator valve
- CommonFaulty ICP sensor or wiring
- PossibleLow or wrong-grade engine oil
- PossibleWiring or connector problem
Typical repair once the cause is confirmed
Repair the oil leak, regulator or sensor problem that testing points to.
Where it shows up
- Seen on oil-fired injection diesels such as the Ford Power Stroke 7.3L and 6.0L
Common questions
What does P2292 mean?
The injection oil pressure is jumping around instead of holding steady.
Can I drive with code P2292?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2292?
Common possibilities to test include: faulty injection pressure regulator valve; faulty icp sensor or wiring; low or wrong-grade engine oil; wiring or connector problem. A shop should confirm the cause before replacing parts.