Home › Code lookup › P2293
Powertrain code · Fuel and air

P2293 Fuel Pressure Regulator 2 Performance

How urgent? Get it checked in the next few days

What it means

The second fuel pressure regulator isn't holding fuel pressure where the computer wants it. Fuel delivery may be too high or too low.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare actual and desired fuel pressure in live data
  2. Check the low-pressure fuel supply

Signs you may notice

  • Check engine light on
  • Hard starting
  • Hesitation, stalling or low power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel pressure regulator 2
  • CommonWeak fuel pump or clogged fuel filter
  • PossibleFaulty fuel pressure sensor
  • PossibleWiring or connector problem

Typical repair once the cause is confirmed

Repair the fuel supply or replace the regulator as testing shows.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel pressure regulator. Prepare an itemized shop request.

Common questions

What does P2293 mean?

The second fuel pressure regulator isn't holding fuel pressure where the computer wants it. Fuel delivery may be too high or too low.

Can I drive with code P2293?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2293?

Common possibilities to test include: faulty fuel pressure regulator 2; weak fuel pump or clogged fuel filter; faulty fuel pressure sensor; wiring or connector problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.