Home › Code lookup › P2297
Powertrain code · Emissions

P2297 O2 Sensor Out of Range During Deceleration Bank 1 Sensor 1

How urgent? Book a check when convenient

What it means

When you lift off the gas, fuel is cut and the front oxygen sensor on bank 1 (the side of the engine with cylinder 1) should read very lean. It isn't, so the sensor may be slow or something is adding fuel.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Watch the front O2 sensor during a coast-down in live data
  2. Check for leaking injectors and exhaust leaks

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • Possible small drop in fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSlow or worn front oxygen sensor
  • CommonLeaking fuel injector
  • PossibleExhaust leak near the sensor
  • PossibleEVAP purge valve stuck open

Typical repair once the cause is confirmed

Repair any leak or fuel problem; otherwise replace the front oxygen sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace upstream oxygen sensor. Prepare an itemized shop request.

Common questions

What does P2297 mean?

When you lift off the gas, fuel is cut and the front oxygen sensor on bank 1 (the side of the engine with cylinder 1) should read very lean. It isn't, so the sensor may be slow or something is adding fuel.

Can I drive with code P2297?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2297?

Common possibilities to test include: slow or worn front oxygen sensor; leaking fuel injector; exhaust leak near the sensor; evap purge valve stuck open. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.