Home › Code lookup › P2512
Powertrain code · Computer

P2512 Event Data Recorder Request Circuit/Open

How urgent? Book a check when convenient

What it means

The computer is watching the event data recorder request circuit and sees what looks like a broken or disconnected circuit. This is the line used to tell the crash data recorder to save information. It does not affect how the car drives.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the connector and wiring for the event data recorder request circuit, checking for damage, corrosion or a loose fit
  2. Check power, ground and signal with a meter
  3. Clear the code and see if it comes back

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWiring or connector fault between the modules
  • CommonLoose or corroded connector
  • PossibleAirbag or crash data module fault
  • PossibleEngine computer fault (rare)

Typical repair once the cause is confirmed

Repair the wiring or connector between the modules; module replacement is rarely needed.

Common questions

What does P2512 mean?

The computer is watching the event data recorder request circuit and sees what looks like a broken or disconnected circuit. This is the line used to tell the crash data recorder to save information. It does not affect how the car drives.

Can I drive with code P2512?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2512?

Common possibilities to test include: wiring or connector fault between the modules; loose or corroded connector; airbag or crash data module fault; engine computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.