Home › Code lookup › P2514
Powertrain code · Computer

P2514 Event Data Recorder Request Circuit High

How urgent? Book a check when convenient

What it means

The computer is watching the event data recorder request circuit and is reading a voltage that is higher than it should be, which often means a broken ground or a short to power. This is the line used to tell the crash data recorder to save information. It does not affect how the car drives.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the wiring and ground connection for the event data recorder request circuit
  2. Check for wires melted or rubbed together in the harness
  3. Measure the circuit with a meter before replacing parts

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWiring or connector fault between the modules
  • CommonLoose or corroded connector
  • PossibleAirbag or crash data module fault
  • PossibleEngine computer fault (rare)

Typical repair once the cause is confirmed

Repair the wiring or connector between the modules; module replacement is rarely needed.

Common questions

What does P2514 mean?

The computer is watching the event data recorder request circuit and is reading a voltage that is higher than it should be, which often means a broken ground or a short to power. This is the line used to tell the crash data recorder to save information. It does not affect how the car drives.

Can I drive with code P2514?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2514?

Common possibilities to test include: wiring or connector fault between the modules; loose or corroded connector; airbag or crash data module fault; engine computer fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.