P2555 Throttle/Fuel Inhibit Circuit High
What it means
The computer is watching the throttle/fuel inhibit circuit and is reading a voltage that is higher than it should be, which often means a broken ground or a short to power. This circuit lets another module tell the engine to limit throttle or fuel, for example for safety or security.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the wiring and ground connection for the throttle/fuel inhibit circuit
- Check for wires melted or rubbed together in the harness
- Measure the circuit with a meter before replacing parts
Signs you may notice
- Check engine light on
- Reduced power or engine may not rev
- Engine may not start in some cases
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWiring or connector fault in the inhibit circuit
- CommonFault in the module that sends the inhibit request
- PossibleAftermarket remote start or alarm wired into the circuit
- PossibleEngine computer fault (rare)
Typical repair once the cause is confirmed
Repair the inhibit circuit wiring or the module sending the signal; remove faulty aftermarket add-ons.
Common questions
What does P2555 mean?
The computer is watching the throttle/fuel inhibit circuit and is reading a voltage that is higher than it should be, which often means a broken ground or a short to power. This circuit lets another module tell the engine to limit throttle or fuel, for example for safety or security.
Can I drive with code P2555?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2555?
Common possibilities to test include: wiring or connector fault in the inhibit circuit; fault in the module that sends the inhibit request; aftermarket remote start or alarm wired into the circuit; engine computer fault (rare). A shop should confirm the cause before replacing parts.